Tripp Lite 2-Port HDMI Over IP Extender Kit w/ RS-232 Serial & IR Control TAA – B160-201-HSI

Product Description

Tripp Lite 2-Port HDMI Over IP Extender Kit w/ RS-232 Serial & IR Control TAA – B160-201-HSI

Specifications
Manufacturer
: Tripp Lite
Manufacturer Part Number
: B160-201-HSI
Manufacturer Website Address
: http://www.tripplite.com
Brand Name
: Tripp Lite
Product Model
: B160-201-HSI
Product Name
: B160-201-HSI Video Extender Transmitter/Receiver
Marketing Information
:
The B160-201-HSI 2-Port HDMI Audio/Video with RS-232 Serial and IR Control over IP Extender Kit extends and distributes HDMI audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch located up to 328 feet (100 m) from the transmitter. With an additional 328 feet between the switch and the receiver, the maximum distance from source to display is 656 feet (200 m). You can also directly connect the transmitter and receiver up to 328 feet apart with Cat5/Cat6 cabling.
The B160-201-HSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.
The B160-201-HSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. In a point-to-multipoint switch installation, you can send the HDMI video source to any analog or digital display, including VGA and DisplayPort?. Dual HDMI ports on the receiver allow the connection of two displays. It extends IR control signals that control a source, such as a Blu-ray? player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.
Features

Extends and Distributes HDMI A/V, Serial and IR Control Signals over Cat5/6 Cabling

Converts source video to IP-based signal transmitted to and distributed through network switch

Transmitter and receiver each extend signal up to 328 ft. (100 m) from switch for maximum distance of 656 ft. (200 m)

Transmitter and receiver can also connect directly without switch up to 328 ft. apart

Dual HDMI outputs on receiver for connecting 2 displays

Designed for Managed Network Switches with IGMP

Allows login and remote management via switch interface

Connect up to 64 transmitters and 255 receivers in single managed switch installation

HDMI output on transmitter for connecting a local display

Enhanced Technical Features

Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz

Uses H.264 video compression standard

Transmits on 20-60 kHz IR frequency

Extends IR control signals that control a source from a remote display

Supports RS-232 serial baud rates up to 57600 Bps

HDCP and 3D compatible

Plug and Play Functionality

No software or drivers required

Hardware included for mounting on wall, rack or pole

TAA-Compliant

Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Product Type
: Video Extender Transmitter/Receiver
Technical Information
Connectivity Technology
: Wired
Number of Input Devices Supported
: 1
Number of Output Devices Supported
: 1
Maximum Operating Distance
: 656.17 ft
Video
Maximum Video Resolution
: 1920 x 1440
Interfaces/Ports
Network (RJ-45)
: Yes
HDMI In
: Yes
HDMI Out
: Yes
Serial Port
: Yes
Number of Network (RJ-45) Ports
: 2
Number of HDMI Inputs
: 1
Number of HDMI Outputs
: 3
Media & Performance
Media Type Supported
: Twisted Pair
Twisted Pair Cable Standard
: Category 6
Physical Characteristics
Form Factor
:
Rack-mountable
Wall Mountable
Pole-mountable
Miscellaneous
Environmentally Friendly
: Yes
Environmental Certification
: RoHS
TAA Compliant
: Yes